Fugetek FT-38L Motion Sensor Light Quickstart Guide
- Out of the box the unit needs sunlight / charge for testing.
- Can test after 6 hours of charging. Take into dark room or cover solar panel for testing.
Push small button next to motion sensor for 3 to 5 seconds to see if unit turns on. (Cannot test in lighted area)
- After unit is charged you can test out 3 modes of operation.
Hold down small button next to motion sensor for 3 to 5 seconds to turn on unit. Unit will blink 3 times.
- When holding small button down 3 to 5 seconds, unit blinks three times, it is cycling through each mode when blinking thre times.
Mode 1 - dim light is on, turns on with motion
Mode 2 - turns on with motion, turns off without motion
Mode 3 - stays on continuous, does not turn off
Can be turned off completely if you push small button after mode 3.
- Once desired mode is selected unit can be installed using included template and screws.
Here's a short demo video from a satisfied customer.